Help

Yale Connect video Solutions

Explore help and frequently asked questions about video solutions or contact our customer service channel.

Soporte

Pairing a Wi-Fi bullet Camera

Check the Wi-Fi Network signal

The Wi-Fi bullet camera requires a 2.4 Ghz Wi-Fi network that has no restrictions or needs a proxy to go online.

Before starting the pairing process, verify that your mobile device (Smartphone or Tablet) has at least two lines of Wi-Fi signal level in the place where the Wi-Fi bullet camera will be installed.

If you do not have good reception of the Wi-Fi network signal, we recommend that you optimize your installation by relocating the modem or using a Wi-Fi modem with a longer range. Remember that you can also connect your Wi-Fi bullet camera by Ethernet.

IMPORTANT: Your mobile device must be connected by Wi-Fi to the 2.4 Ghz network in your home and it must have an Internet connection during the entire pairing process.

If this is the first time you use the application, the home screen will give you a welcome message, press the "Start" button.

If you are adding another Wi-Fi bullet camera, go to Menu / Devices / and tap on the "Add device" button, then select or add a Home to start the pairing process / Select the Wi-Fi bullet camera and the app will guide you step by step to carry out this process:

 

The application will ask you to enter the key of your Wi-Fi network, when confirming, scan the QR code shown in the application with the camera.

  • Make sure the camera is in a bright place and that your mobile device is 15 to 30 cm from the camera when scanning.
  • The camera must be steady, make sure it does not move while scanning the QR code.

In this way the Camera will be linked to your home Wi-Fi network.

IMPORTANT: Provide the correct key for your Wi-Fi network otherwise the device will not be able to link to it.

My account

From the My Account option you can manage your Data, Homes and Security of the app.

My data

In this section you will find your account registration data: Name, Surname, Email and the Language you prefer to use (English, Spanish, Portuguese). Remember that it is not possible to edit the registered email. If you want to change email in the app, you must delete the account and create it again.

My Homes

From the Yale Connect video app you can manage different homes in different time zones for your devices. You will be able to edit and delete the configuration of your Homes.

Important: It is necessary to configure the Time Zone of your Home so that alarms, recordings, and notifications are registered according to your country and the corresponding time zone.

Security

Change password: Press this button if you need to change the current password for your Yale Connect video account. You will need to enter your current password and the new password of your choice. Then the application will ask you to log in again with the new credentials.

Enable lock: Press this button if you want to enable / disable the access lock to the Yale Connect Video app on your device. You will need to enter a numeric PIN between 4 and 8 digits. This function allows you to register a PIN code that will be required each time you want to access the Yale Connect video app from your mobile device.

Log out: Press this button if you want to log out of the Yale Connect video app on your device. You can also access this function from Menu / Logout.

Delete account: Press this button if you want to delete your Yale Connect account.